10.1-inch Raspberry Pi All-in-One touchscreen display review – Part 1: Unboxing and installation

我刚刚收到了一个用于Raspberry PI Model B板的10.1英寸触摸屏显示器1920x1080 resolutions from theEVICIV store on Amazon此外，还提供具有1366×378和1280×800分辨率的型号，并允许用户根据流行的SBC创建一体化计算机。

该产品也可以作为一个独立的display connected to an HDMI or USB-C (via DisplayPort Alt mode) source, so it could be interesting for all sorts of projects and not only ones relying on Raspberry Pi boards. In the first part of the review, I’ll check out the hardware, install a覆盆子PI 4., and boot it to check out whether it works, before going into more details in the second part of the review.

RPI All-in-One Touchscreen Display Unboxing

The package lists some of the specs and highlights features of the device with a built-in stereo speaker, support for older and new Raspberry Pi Model B single board computers, a cooling system, HDMI and USB-C input ports, adjustable backlight, rotation support, and so on.

该包装包括显示屏本身，两个USB-C电缆，HDMI电缆，12V / 2A电源，覆盆子PI 4和Raspberry PI 3板的板，HDMI和USB适配器，用于触摸屏功能的USB电缆，一些螺钉加上用于装配的螺丝刀，以及仅英文的用户手册。

We’ll find a stand on the back, buttons (Power, Menu, Up/Down, and Exit), HDMI and USB-C input ports, a 3.5mm audio output jack, as well as the DC jack, plus an air inlet (left) and outlet (right) equipped with a fan.

扬声器的开口以及75×75mm VESA安装件的安装线也可以在后面看到，用于安装在肖像或景观模式的显示屏上或壁挂。

覆盆子PI.touchscreen display installation

We’ll need to remove the six screws at the back (including the one under the stand) to take out the cover. Remember to peel off the four golden sticker on top of the threads, or you won’t be able to fasten the board with the provided screws.

由于不包括覆盆子PI板，因此我收集了覆盆子PI 4和Raspberry PI 2，以显示要采取的步骤。

You’d need to connect the micro HDMI and USB-C adapters to the Raspberry Pi 4, and the HDMI and micro USB adapters to the previous generation Raspberry Pi model B boards.

10点USB触摸面板有两种选项。该餐厅要求用户将3个电线焊接到电路板，而更简单的替代方案是将电缆连接到其中一个USB端口。在任何情况下，您都会丢失USB端口，但接线不会从外部显示第一个解决方案。公司在焊接电线后，该公司没有提供任何关闭二手USB端口，所以你必须记住它是哪一个，放一些录音带，或者得到一个USB port locker.

Now we can install our Raspberry Pi 4 inside the display. The important part is to make sure the headers from HDMI and USB-C adapter are properly aligned. It took me two or three tries to get it right, as it’s quite easy to insert them with only one row or shifted by one pin. I also had to connect the touch panel cable making sure it went through on the openings of the chassis, and finally secure the board with four screws, which ended up being just three in my case, as I lose one in the process. I usually like when companies provide at least one extra screw, but it was not the case for this kit.

首先启动

我们现在可以放背盖，连接12V电源适配器，然后按电源按钮启动它。

好消息是它在没有问题的情况下运行，我可以使用没有键盘或鼠标的触摸屏开始更新。请注意，我用microSD覆盆子PI OS“Bullseye”图像I tested on Raspberry Pi Zero 2 W with modifications, which explains why I already had WiFi all set up. The less nice thing is the fan is really noisy, and there’s no software keyboard by default, but I’m sure it’s just a matter of configuring the OS.

In the next part of the review, I plan to test the All-in-One display by checking out Raspberry Pi 4 performance both with and without the fan, check portrait and landscape modes, try out web browsing with the touch function, test USB-C and HDMI input ports, and see if some other Raspberry Pi compatible SBCs likeNanoPi M4V2可以使用显示器，虽然我怀疑它，因为端口可能不完全对齐，以及不同选择的端口，例如，M4V2中的USB-C和全HDMI。

我要感谢Eviciv发送审查样本。如果您有兴趣，可以购买10.1英寸全高清版本for $179.99 on Amazon, or even 10% less as there’s a coupon option at this time. The 10.1-inch touchscreen display can also be purchased for $159.99 and $169.99, again before the 10% discount, with 1280×800 and 1366×768 resolutions respectively. [Update: It has been brought to my attention the kit is alsosold on Aliexpress, possibly at a cheaper price depending on the destination country]